2
PREPARATION
Ensure air and surface temperatures are above 60°
F and truck box is clean.
COMPONENTS
• (8) Clamps
• (2) Anchors
• Driver side rail
• Passenger side rail
• Pre-folded cover assembly
• Alcohol pad
• Primer
TOOLS NEEDED
• 1/2” Wrench
• Ft-lbs torque wrench with 1/2” socket
• Marking tool
• Protective eyewear
• Gloves
• 7/16” Wrench (optional)
• Spring clamp (optional)
NOTE:
U
nder the rail drop-in bed liner requires minimal modification at front corner of box
and back by tailgate. Over the rail drop-in bed liner requires considerable modification.
NOTE:
For additional protection against the elements, locate and seal miscellaneous
factory holes, crevices, stake pockets, etc. that may be in box (sealant not included).
!
CAUTION: Over torquing hardware may damage components.
!
CAUTION:
Before using, read and understand all directions, warnings and precautions.
For more information, visit primer manufacturer’s website.
!
DANGER:
Highly flammable liquid and vapor. Do not use or store primer near fire or
flame. Use in well ventilated area. No smoking. Avoid contact with eyes. Do not breathe
vapor. Keep out of reach of children. Wear protective gloves and eye/face protection.
May be fatal if swallowed and enters airways. May cause an allergic skin reaction. May
cause drowsiness or dizziness.
Clamps
Driver side rail
Safety strap
hole toward
front of box
Rear
Latches on
rear panel
Cover assembly
Passenger
side rail
Storage brackets on
header panel
Pivot link in clip
(underneath)
Retainment
bracket
PARTS DIAGRAM
Front
(closest to cab)
Anchors
