background image

TM

062320   2000310_A

MANUFACTURER’S LIMITED WARRANTY

Agri-Cover, Inc. extends the following three (3) year Limited Warranty for the LOMAX

TM

 

STANCE

TM

 Hard Cover:

Agri-Cover, Inc. warrants a period of three (3) years from the date of manufacture that its 

LOMAX

TM

 STANCE

TM

 Hard Cover is free from defects in workmanship under normal use 

for the truck model it was intended for. This Limited Warranty does not cover any damage 

due to accident, abuse, misuse, alteration, neglect, improper installation, or ordinary wear 

and tear.
Agri-Cover, Inc.’s sole obligation under this Limited Warranty is limited to the repair or 

replacement at its option, of defective parts only. No labor or service allowance is given 

or implied. IN NO EVENT SHALL AGRI-COVER, INC. BE LIABLE FOR INCIDENTAL, 

CONSEQUENTIAL, OR SPECIAL DAMAGES. AGRI-COVER, INC. EXPRESSLY 

DISCLAIMS ANY AND ALL IMPLIED WARRANTIES OF MERCHANTABILITY, AND 

THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE LIMITED WARRANTY 

DESCRIPTION CONTAINED HEREIN.
For warranty, have serial number ready and 

fill  out  the  warranty  claim  form  at

 

agricover.com/warrantyclaim or call Customer Service Department at 844-566-2987 to 

determine if only a replacement part is needed or if the cover needs to be returned for 

inspection and repair. Goods to be returned must have a pre-authorized RA # (Return 

Authorization Number) - obtained by calling the number above. Mark the number on the 

package and ship it freight prepaid to address below. Agri-Cover, Inc. will pay freight to 

return goods to sender.
This

 Limited Warranty gives you specific legal rights and you may have other rights, which 

vary, from state to state.
For replacement parts shop at lomaxparts.com or call Customer Service at 

 

844-566-2987.

Hours: 8:00 am - 5:00 pm CST Monday through Friday, except Holidays

Agri-Cover, Inc.

Customer Service Dept

3000 Hwy 281 SE

Jamestown, ND 58401

Phone: 844-566-2987

© 2020 AGRI-COVER, INC. ALL RIGHTS RESERVED.

Product subject to change without notice. Patents: agricover.com/patents. 

Содержание Lomax Stance Hard Cover













Отзывы: