Safety
16
The main beam is simulated by a pilot laser.
The laser is not harmful to the skin. The eyes are protected by the natural blink reflex.
•
Before starting up, always plug the fiber laser cable into the socket provided, before do-
ing so remove the protective caps and any dirt.
Operation
•
The laser marking device may only be operated by trained personnel.
It is advisable to log both the initial training as well as the regular refresher courses.
•
The device may only be operated when connected to an alternating voltage supply cor-
responding to the specifications on the type plate.
•
The effectiveness of the protective conductor must be regularly checked and confirmed
by an authorized skilled worker.
•
If a defect occurs in the laser marking device, it must be disconnected from the power
supply system and secured against being switched on again.
Maintenance/Care
•
Maintenance and repair work on the laser device may only be performed by the man-
ufacturer.
•
The device must be disconnected from the power supply system before the covers are
removed.
•
Do not touch the electrical/electronic components. Capacitors could still be charged
and so be under voltage.
