ACI Hoist & Crane MLH-005 страница 3 Скачать руководство пользователя

Страница: 3 / 16

Lever Hoists

PAGE: 3

Model MLH

MLH-005 & MLH-010

1.0 WARRANTY

Every product is thoroughly inspected and tested before it is shipped from the factory. If any problem develops within one year,

return the product prepaid to the factory. If an inspection reveals that the problem is caused by defective workmanship or material,

repairs will be made without charge and the product will be returned with the shipping prepaid.

Excluded Items

This warranty does not cover:

•

Deterioration caused by normal wear, abuse, chemical or abrasive actions, improper maintenance, or excessive heat.

•

Problems resulting from repairs, modifications, or alterations made by people other than factory or ACI representatives.

•

If the product has been abused or damaged due to an accident.

•

If repair parts or accessories other than ACI equipment are used on the product; they are warranted only to the extent that

they are warranted by the manufacturer of said parts or accessories.

Remarks

EXCEPT AS STATED HERE, ACI MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WARRANTIES FOR A PARTICULAR

PURPOSE.

Alterations or modifications of equipment and use of non-factory repair parts

can lead to dangerous operation and injury.

To avoid injury:

DO NOT

alter or modify equipment.

DO NOT

use equipment to lift, support or otherwise transport people.

DO NOT

suspend unattended loads over people.

Содержание MLH-005
















Результаты поиска

Содержание MLH-005

Отзывы:

Похожие инструкции для MLH-005

Бренды по названию

Популярные бренды

ACI Hoist & Crane MLH-005, Руководство по эксплуатации

Результаты поиска

Содержание MLH-005

Отзывы:

Похожие инструкции для MLH-005

Бренды по названию

Популярные бренды