ACI Hoist & Crane MLH-005 Скачать руководство пользователя

Страница: 5 / 16

Lever Hoists

PAGE: 5

Model MLH

MLH-005 & MLH-010

3.0 GENERAL DESCRIPTION

This document provides information and maintenance of ACI Lever Hoist/ Puller. Operators and persons maintaining the hoist

should be familiar with this manual. Following the precautions, procedures and maintenance practices in this manual should ensure

long and reliable operation.

People responsible for the installation operation, and or maintenance of the hoisting equipment should be familiar with the

American National Standard ANSI B30.21 for guidelines on the safe operation of lever hoists. That document contains rules on

inspection requirements and records that may be required by some of the regulatory agencies.

3.1 Hoist Construction

The Steel Body Lever Hoist/ Puller is a dependable way to accurately position heavy loads, loading and lifting freely suspended loads

within the hoist’s rated load. The reversing lever and free-chain wheel provide an ease of control, even with work gloves. The hoist

can be used in confined spaces due to the short handle and low handle chair.

Содержание MLH-005
















Результаты поиска

Содержание MLH-005

Отзывы:

Похожие инструкции для MLH-005

Бренды по названию

Популярные бренды

ACI Hoist & Crane MLH-005, Руководство по эксплуатации

Результаты поиска

Содержание MLH-005

Отзывы:

Похожие инструкции для MLH-005

Бренды по названию

Популярные бренды