Achiever Hugo 26, Руководство пользователя

Страница: 16 / 44

2013 © Fanciteck International Ltd. All rights reserved. Page 14
2.2 Setting up the Handlebar
1. Remove all protective packaging from the handlebar
assembly if not already done. Turn the fork of the bicycle to
face forward. Hold the front tire between your legs facing
the bike while you turn the head stem to straighten it. Make
sure the head stem’s direction is aligned with the front wheel.
2. Lock tightly the head stem and the head tube with the
steerer clamp bolts with a fixing torque of 10 Nm.
3. Unscrew the handlebar clamp bolts and remove the stem
cap.
4. Put the handlebar in the center of the handlebar clamp.
Ensure that the diameters of the stem’s handlebar clamp
and the central section of the handlebar match perfectly.
5. Put the stem cap on and tighten the handlebar clamp bolts.
The bolts MUST BE tightened in cross sequence: Tighten the
bolts in sequence (1-2-3-4) initially to a tightening torque of
5 Nm, then tighten the bolts in sequence (1-2-3-4) to a