Achiever Hugo 26, Руководство пользователя

Страница: 13 / 44

2013 © Fanciteck International Ltd. All rights reserved. Page 11
washer, be sure the step fits into the key hole at the top of
the wheel slot.
3. Tighten the two outer axle nuts evenly;
4. Tighten one side part way, then tighten the other side and
repeat until both sides are tightened securely.
5. Be sure that the wheel is centered between the fork legs. If
it is off center, loosen the axle nut on the side that has a
smaller gap between tire and fork leg, and use your hand to
push the wheel to a centered position; hold the wheel with
one hand, and tighten the axle nut and check again. Repeat
if needed to be sure the wheel is centered and securely
tightened. Tighten the wheel nuts equally and evenly to a
torque of 40 Nm.
Quick Release Wheels
1. Locate the quick release skewer. Some tire tread patterns
have a direction, so compare your front tire and rear tire of
the bicycle so that both tread patterns face the same way.