BUTTON OPERATIONS
MODE BUTTON
Press the MODE button to move between all functions in loop
sequence as “→ ” path from one function screen to another.
1. Setup operations include 12/24hour clock,, wheel circumference,
units and fuel meter input resistance selection. These must be
set up step by step. The computer will be automatic reversion to
normal mode if no button operation for 75 seconds at any setting
screen.
2. Press both MODE & RESET buttons to go into setting screen. In
each setting screen, press RESET button to increment the flashing
digit by 1 or convert units, press MODE button to confirm the digit
setting and jump to next digit or next setting screen to be set. Press
MODE button for 2 seconds at any setting screen to finish the setting
and go to normal mode.
3. It displays "12 or 24H and XX:XX-XX" symbols as well AM/PM in
12H mode. Operates buttons as per descriptions of item 2 to finish
clock setting and jump to wheel circumference setting.
4. In "cXXXX" display, "c" means "Circumference", following 4 default
digits; flashing digit is digit to be set. Follow the item 2 of button
operation to finish the wheel circumference setting and jump to
unit setting.
5. It displays KM/H or MPH, each press of RESET button switches
units; press MODE button to confirm unit setting and jump to fuel
sensor resistance setting.
6. It displays “100r” and fuel tank symbol, follow the item 2 to select
100, 250, 510ohm, -100, -250, -510Ohm or OFF and jump to jump
to clock setting or return to Normal Mode. The fuel meter bar will
disappear if you select oFF mode.
RESET BUTTON
1. Press MODE button to get to the desired screen then press
RESET button for 2 seconds to reset Trip 2, MAX SPD and
AVG speedometer from stored values to zero individually.
2. The data of Trip 1, AVG & RT can be reset at the same time
when one of the 3 data functions is being reset.
3. ODO, clock and TT data cannot be reset.
Mode
FUNCTIONS
Km/H or MPH: Speedometer
Displays speed meter up to 399 Km/H or 248 MPH.
MAX: Maximum Speed Meter
Displays highest speed achieved since last Reset operation.
AVG: Average Speed Meter
It calculates average speed since last RESET. The AVG is calculated
from TRIP 1 be divided by RT.
TRIP 1&2: Trip Meter 1 and 2
TRIP function accumulates trip distance since last RESET as long as
bike/vehicle is in motion.
ODO: Odometer
ODO accumulates total accumulated distance traveled during
bike moving.
RT: Riding Timer
1. Calculates total running time since last RESET.
2. Count automatically begins with movement.
TT: Total Riding Time
1. Calculates total riding time traveled during bike moving.
2. TT data is stored in memory, and cannot be reset.
: 12/24 hour Clock
It displays 12 or 24 hour current time.
: Fuel Gauge
1. Have 7 bars to indicate how much fuel remains.
2. Built-in +/- 100, 250 and 510Ohm fuel sender resistance,
the fuel bar display will disappear in when you select “ off ”
mode.
3. Last bar flashes to indicate low fuel level automatically.
Mode
Mode
Mode
WHEEL CIRCUMFERENCE TABLE
Ti
re
Siz
e
Circumferen
ce number
(mm)
Ti
re
Siz
e
Circumferen
ce number
(mm)
Ti
re
Siz
e
Circumferen
ce number
(mm)
23 inch
24 inch
25 inch
26 inch
19 inch
20 inch
21 inch
22 inch
15 inch
16 inch
17 inch
18 inch
1835
1915
1995
2075
1516
1596
1676
1756
1197
1277
1357
1436
1. The details below have been calculated using following formula: Tire
Diameter (inches) x 25.4(mm/inches) x 3.1416 = wheel circumference
(in mm).
2. Identify the tire size of your ATV/Motorcycle when you need to change
different tire size and key in the corresponding number shown in the
following chart.
3. The computer calculates the wheel rotating length between 2 passes
of the magnet; use this table to find the settings when you are using
a reed sensor or an universal hall sensor with magnet to measure
your speed.
4. If you are using a cable drive speed sensor then divide the number in
the above table by the number of turns of the cable drive for each
revolution of the wheel. For example if 1 wheel revolution equals
5 turns of speed cable then the wheel circumference has to be
divided 5.
5. You can use more magnets, but the wheel circumference setting
must be divided by the number of magnet you installed.
Mode
Mode
Mode
Mode
Clock,Wheel Circumference,Units and Fuel Gauge Resistance SET UP
