Acer XF272U Скачать руководство пользователя

Страница: 27 / 30

English

6. Refresh rate num: Display the panel’s current refresh rate on the screen.

-----------------------------------------------------------------------------------------------------------

Note:

If FreeSync set "On" you can see the V Frequency to changes in the OSD.

7. VRB: To choose whether to support dynamic picture more clean control, default is Off.

---------------------------------------------------------------------------------------------------------

Note:

PIP/PBP mode is not support VRB.

HDR setting: "Auto" is not support VRB.

VRB set "On", when to turn on FreeSync, will auto set VRB is "Off".

VRB set "On", when to adjustment (Brightness, Blue Light, ACM), will auto

set VRB is "Off".
5. VRB function does not affect the (Logo, Aim Point, Message and Input Icon)

brightness.
6.

VRB setting "On", when detection of Input Timing <75Hz, will auto off the

VRB and gray out to disable.
7. VRB = (Normal or Extreme), because the IC control dynamic picture is

cleaner, so the overall Brightness will be dark, "Extreme" will be darker than

“Normal”.

8. Ultra-Low Latency: Set to On to speed up the processing time of the display switching

process.

----------------------------------------------------------------------------

Note:

1. FreeSync is On, the Ultra-Low Latency automatic set to On and gray

out unavailable.

2. Ultra-low latency is not supported at resolutions below 800x600.

9. Aim point: Show an Aim point on the screen for shooting games.

-----------------------------------------------------------------------------------------------------------

Note:

In PBP mode the Aim point not displayed.

OSD

Mode - User

120

English

OSD Timeout

Picture

Color

Language

Oﬀ

Transparency

Enter

Move

Oﬀ

OSD Lock

OSD

System

Save Settings to...

Audio

Gaming

Press the MENU key to open the OSD.

2. Toggle the joystick to the up or down to select OSD from the OSD.Then toggle to the

Содержание XF272U































Результаты поиска

Содержание XF272U

Отзывы:

Похожие инструкции для XF272U

Бренды по названию

Популярные бренды

Acer XF272U, Руководство пользователя

Результаты поиска

Содержание XF272U

Отзывы:

Похожие инструкции для XF272U

Бренды по названию

Популярные бренды