94
Standard Timing ID 3: 1280 x 960 @60Hz
Standard Timing ID 4: 1280 x 800 @60Hz
Standard Timing ID 5: 1440 x 900 @60Hz
Standard Timing ID 6: 1024 x 768 @85Hz
Standard Timing ID 7 - Not Used
Standard Timing ID 8 - Not Used
______________________________________________________________________
(36H-47H) Detailed Timing / Descriptor Block 1:
1024x768 Pixel Clock: 65.00 MHz
______________________________________________________________________
Horizontal Image Size: 0 mm Vertical Image Size: 0 mm
Refreshed Mode: Non-Interlaced Normal Display - No Stereo
Horizontal:
Active Count: 1024 pixels Blanking Count: 320 pixels
Sync Offset: 24 pixels Sync Pulse Width: 136 pixels
Border: 0 pixels Frequency: 48.36 kHz
Vertical:
Active Count: 768 lines Blanking Count: 38 lines
Sync Offset: 3 lines Sync Pulse Width: 6 lines
Border: 0 lines Frequency: 60.00 Hz
Digital Separate, Horizontal Polarity (-) Vertical Polarity (-)
______________________________________________________________________
(48H-59H) Detailed Timing / Descriptor Block 2:
Monitor Range Limits:
Min Vertical Freq - 48 Hz
Max Vertical Freq - 86 Hz
Min Horiz. Freq - 31 kHz
Max Horiz. Freq - 93 kHz
Pixel Clock - 110 MHz
GTF - Not Used
______________________________________________________________________
(5AH-6BH) Detailed Timing / Descriptor Block 3:
Monitor Name:
X1235
______________________________________________________________________
(6CH-7DH) Detailed Timing / Descriptor Block 4:
Monitor Serial Number:
J97050018401
(7EH) Block No: No Extension EDID Block(s)
CheckSum OK
Содержание X1130 Series
