manualshive.com logo in svg

Acer Veriton X4620G, Руководство по обслуживанию, Страница: 26 / 132

Поделиться
Скачать
Acer Veriton X4620G Скачать руководство пользователя страница 26

18

Chapter 2

Advanced Chipset Configuration

Intel EIST

This item allows users to enable or disable the EIST (Enhanced Intel 
SpeedStep technology).

Enabled

Disabled

Intel Turbo Boost

This item allows users to enable or disable the Intel Turbo Boost.

Enabled

Disabled

Intel AES-NI

Enables or disables Advanced Encryption Standard New Instructions

(AES-NI).

Enabled

Disabled

Intel XD Bit

When enabled, the processor disables code execution when a worm attempts 
to insert a code in the buffer preventing damage and worm propagation. When 
disabled, the processor forces the Execute Disable (XD) Bit feature flag to 
always return to 0. 

Enabled

Disabled

Intel VT

Enables or disables the Virtualization Technology (VT) availability. If enabled, a 
virtual machine manager (VMM) can utilize the additional hardware 
virtualization capabilities provided by this technology. 

Note:

 A full reset is required to change the setting. 

Enabled

Disabled 

Intel AMT

This item allows you to enable or disable the Intel Virtualizationa 
Technology(IntelAMT) function.

Enabled

Disabled

Intel VT-d

This item allows you to enable or disable the Intel Virtualizationa 
Technology(IntelVT-d) function.

Enabled

Disabled

Intel TXT

This item allows you to enable or disable the Intel Virtualizationa 
Technology(IntelTXT) function.

Enabled

Disabled

Primary Video

Select a graphic controller as a primary boot device.

Auto

PCIE

Onboard VGA

Video Memory Size

Select the amout of system memory used by the Intel graphics device.

32 MB

64 MB

128 MB

Disabled

DVMT Mode

DVMT is Dynamic Video Memory Technology. This item helps you select 
videomode.

DVMT

Fixed

DVMT Memory Size

When set to DVMT Mode, the graphics chip will dynamically allocate system 
memoryas graphics memory, according to system anf graphics requirements.

128 MB

256 MB

Maximum

Содержание Veriton X4620G





































































































































Отзывы:

Нет отзывов