![background image](http://html.mh-extra.com/html/acer/veriton-x4620g/veriton-x4620g_service-manual_2838243011.webp)
Chapter 1
3
LAN
•
Controller: Q77: Intel 82579LM Gbt LAN controller/PHY for VX6 series.
•
RJ-45 Back panel port with Link/Activity LEDs.
•
Support Wake up on LAN function, including from S3,S4,S5,G3->S5, power button off (non-ACPI OS).
•
Can support 4KV surge for China (option, default not).
Audio
•
Chip : HD audio codec ALC662-VD HD codec 5.1
•
Connectors support:
•
Rear 3 jack follow HD audio definition (ALC662-VD).
•
Audio jacks color coding: should meet Microsoft Windows Logo Program Device Requirements:
Audio-0002.
•
1 front panel audio header (2*5).
•
1 internal speaker header (2*4).
•
S/N ration: 90dB at rear output jack.
•
Audio jacks color coding: should meet Microsoft Windows Logo Program Device Requirements:
Audio-0002.
•
1 front panel audio header (2*5).
•
One earphone and one microphone jack is required on front bezel.
•
1 4*1 SPDIF internal header closed to PCIEx16 slot.
•
Auto detection and re-tasking behavior is following Acer Audio Jack spec.
USB ports
•
Controller: 7 Series Express Chipset(Pather Point).
•
Ports Quantity: Q77: 14.
•
4 back rear ports(USB2.0 * 2 ports, USB 3.0*2).
•
4 ports for front daughter board(2*USB3.0 , 2*USB 2.0).
•
3 x USB 2.0 headers support additional six USB 2.0 ports.
•
Connector Pin: standard Intel FPIO pin definition.
•
Data transfer rate support:
•
USB 3.0/2.0/1.1
•
All USB ports must be boot-capable includes USB-ODD, USB-HDD, USB-FDD, and etc…
•
All USB ports must provide the over current protection.
•
The pin connector should be located on upper if placed on horizontal.
•
Support disable function by each USB port in BIOS.
•
Enable the USB EHCI Debug Ports.
•
All ports should meet USB IF spec.
Extension slot
•
1 * PCIE x16 (PCIE V3.0)
•
1 * PCIE x1 (PCIE V2.0)
Buzzer
•
1 on board buzzer
Содержание Veriton X4620G
