Chapter 1
1
Features
Below is a brief summary of the computer’s many feature:
NOTE:
The features listed in this section is for your reference only. The exact configuration of the system
depends on the model purchased.
Operating System
•
Microsoft Windows 7 Professional (32-bit/64-bit)
•
Microsoft Windows
7 Professional 32/64bit dual load
•
Microsofte Windows 7 Home Pre
mium (32-bit/64-bit)
•
Microsoft Windows7 Home Basic
(
32
-
bit
/64-bit)
•
Microsoft Windows XP Professional
•
Linpux Linux X window mode
•
FreeDos
Processor
•
Socket Type: LGA 1155 pin
•
Socket Quantity: 1
•
Processor Type:
•
Intel Sandy Bridge Processor.
•
32 nm, 2nd Generation Hi-K+metal gate process processor core.
•
32nm, Hi-K+metal gate process, Intel? HD Graphics & Integrated Memory Controller.
•
Support 95W CPU.
Chipset
•
PCH: Intel Q67
•
Design Criteria:
•
Should meet Intel Cougar Point platform design guide.
•
Super I/O:
•
Should support Intel PECI 3.0.
•
Should support SST signal output.
•
Please follow Intel design guide.
PCB
•
Max. 244 mm x 244 mm, MicroATX
Memory subsystem
•
Socket Type: DDR III connector
•
Socket Quantity: 4
•
Channel A: slot 2, 4; Channel B: slot 1, 3
•
Different colors for slot 2/4 and slot 1/3
System Tour
Chapter 1
Содержание Veriton M6618G
