![background image](http://html1.mh-extra.com/html/acer/veriton-m6618g/veriton-m6618g_service-manual_4693302019.webp)
Chapter 1
11
SATA Interface
USB Port
Environmental Requirements
Power Management
•
Devices wake up from S3 should be less than.
•
Devices wake up from S5 should be less than 10 seconds.
Item
Specification
SATA controller
Intel Q67
Number of SATA channel
SATA X 6
Support mode
RAID/AHCI/IDE mode option
Item
Specification
Universal HCI
USB 2.0/1.1
USB Class
Support legacy keyboard for legacy mode
USB Connectors Quantity
Ports Quantity: 14
•
6 back rear ports(USB2.0 * 6 ports)
•
On-board: 4 2*5 headers ( 8ports)
•
4 ports for front daughter board,4 ports reserved
•
Connector Pin: standard Intel FPIO pin definition
Item
Specification
Temperature
Operating
+5°C ~ +35°C
Non-operating
-20 ~ +60°C (Storage package)
Humidity
Operating
15% to 80% RH
Non-operating
10% to 90% RH
Vibration
Operating (unpacked)
5 ~ 500 Hz: 2.20g RMS random, 10 minutes per axis in all 3 axes.
5 ~500 Hz: 1.09g RMS random, 1 hour per axis in all 3 axes.
Devices
S1
S3
S4
S5
Power Button
V
V
V
V
USB Keyboard/Mouse
V
V
N/A
N/A
PME
Disabled
Disabled
Disabled
Disabled
RCT
Disabled
Disabled
Disabled
Disabled
WOR
Disabled
Disabled
Disabled
Disabled
Содержание Veriton M6618G
