Acer Veriton 7500 Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 94

background image

iv

Use conditions

This part complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.

Notice: Canadian users

This Class B digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations.

Remarque à l’intention des utilisateurs canadiens

Cet appareil numérique de la classe B respected toutes les exigences du
Règlement sur le matériel brouilleur du Canada.

Important safety instructions

Read these instructions carefully. Save these instructions for future reference.

1

Follow all warnings and instructions marked on the product.

2

Unplug this product from the wall outlet before cleaning. Do not use
liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

3

Do not use this product near water.

4

Do not place this product on an unstable cart, stand, or table. The product
may fall, causing serious damage to the product.

5

Slots and openings in the housing and the back or bottom are provided for
ventilation; to ensure reliable operation of the product and to protect it
from overheating, these openings must not be blocked or covered. The
openings should never be blocked by placing the product on a bed, sofa,
rug, or other similar surface. This product should never be placed near or
over a radiator or heat register, or in a built-in installation unless proper
ventilation is provided.

6

This product should be operated from the type of power indicated on the
marking label. If you are not sure of the type of power available, consult
your dealer or local power company.

7

Do not allow anything to rest on the power cord. Do not locate this
product where persons will walk on the cord.

8

If an extension cord is used with this product, make sure that the total
ampere rating of the equipment plugged into the extension cord does not
exceed the extension cord ampere rating. Also, make sure that the total
rating of all products plugged into the wall outlet does not exceed the fuse
rating.

9

Never push objects of any kind into this product through cabinet slots as
they may touch dangerous voltage points or short out parts that could

VT7500series_EN.book Page iv Tuesday, April 16, 2002 11:42 AM

«
...
2
3
4
5
6
...
»

Содержание Veriton 7500































































































Отзывы:

Нет отзывов

Похожие инструкции для Veriton 7500

Бренд: Zotac Страницы: 57

Бренд: IBASE Technology Страницы: 19

Бренд: Arista Страницы: 47

Бренд: Jupiter Страницы: 2

Бренд: HP Страницы: 66

Бренд: HP Страницы: 28

Бренд: Lenovo Страницы: 51

Бренд: Lenovo Страницы: 61

Бренд: Lenovo Страницы: 59

Бренд: Lenovo Страницы: 53

Бренд: Lenovo Страницы: 83

Бренд: Lenovo Страницы: 59

Бренд: Lenovo Страницы: 52

Бренд: Lenovo Страницы: 61

Бренд: Lenovo Страницы: 73

Бренд: Lenovo Страницы: 35

10089/1168/4744

Бренд: Lenovo Страницы: 57

Бренд: Lenovo Страницы: 59

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды