Acer UM.QB8AA.001 Скачать руководство пользователя страница 27

Страница: 27 / 34

•

CIE 1931 positive and negative error of 0.05, ("HDR" according to current Panel

to fine-tune).

•

Color Space = HDR, the Modes = HDR, Picture page HDR = Auto.

•

Modes = (Action/Racing/Sports/User/Standard/ECO/Graphics) is selected; the

color space is auto set to “General”.

•

Color Space = (sRGB/Rec.709/HDR/EBU/DCI/SMPTE-C), If to adjust the

parameter the Modes will not jump to User mode, but the Color Space =

“General” except.

•

Color Space = (sRGB/Rec.709/HDR/EBU/DCI/SMPTE-C), 6-Axis Hue &

Saturate is gray out and unavailable.

•

Color Space = (sRGB/Rec.709/HDR/EBU/DCI/SMPTE-C), Grayscale Mode is

gray out and unavailable.

•

Color Space = (sRGB/Rec.709/HDR/EBU/DCI/SMPTE-C), (Light & Color)

Sensor are gray out and unavailable.

•

8. ColorSense: Automatically adjust color temperature smoothly.

-----------------------------------------------------------------------------------------------------------

Note:

•

ColorSense is On, Factory Menu can check the CT (Color Temp) Value.

• Mode = HDR, does not support the ColorSense.

•

Color Space = (sRGB/Rec.709/HDR/EBU/DCI/SMPTE-C), does not support

the ColorSense.

• ColorSense is on, the Modes is User, the (Contrast, Color Temp, Low Blue

Light, 6 axis Hue, 6 axis Saturate, Grayscale Mode) functions are gray out

and unavailable.

9.  Grayscale Mode:To choose Grayscale mode.
10.  6-axis Hue: Adjust the red, green, blue, yellow, magenta and cyan hue.
11.  6-axis

Saturate: Adjust the red, green, blue, yellow, magenta and cyan saturation.

Содержание UM.QB8AA.001



































Результаты поиска

Содержание UM.QB8AA.001

Отзывы:

Похожие инструкции для UM.QB8AA.001

Бренды по названию

Популярные бренды

Acer UM.QB8AA.001, Руководство пользователя

Результаты поиска

Содержание UM.QB8AA.001

Отзывы:

Похожие инструкции для UM.QB8AA.001

Бренды по названию

Популярные бренды