Chapter 4
85
Error Message List
No beep Error Messages
FRU/Action in Sequence
No beep, power-on indicator turns off and LCD is
blank.
Power source (battery pack and power adapter). See “Power
System Check” on page 80.
Ensure every connector is connected tightly and correctly.
Reconnect the DIMM.
LED board.
System board.
No beep, power-on indicator turns on and LCD is
blank.
Power source (battery pack and power adapter). See “Power
System Check” on page 80.
Reconnect the LCD connector
Hard disk drive
LCD inverter I
LCD cabl
LCD Inverter
LCD
System board
No beep, power-on indicator turns on and LCD is
blank. But you can see POST on an external
CRT.
Reconnect the LCD connectors.
LCD inverter I
LCD cabl
LCD inverter
LCD
System board
No beep, power-on indicator turns on and a
blinking cursor shown on LCD during POST.
Ensure every connector is connected tightly and correctly.
System board
No beep during POST but system runs correctly.
Speake
System board
Error Beep List
Code
Beeps
Description
00h
Two long beeps, one short beep, then one long beep.
Success
F1h
One long and one short beeps.
BIOS file size mismatch
F2h
One long and two short beeps
BIOS reading error
D1h
Two short beeps.
Floppy drive not installed
Содержание TravelMate 220 series
