Acer PH112 Скачать руководство пользователя страница 55

Страница: 55 / 59

Chapter 6

FRU (Field Replaceable Unit) List

This chapter gives you FRU ( Field Replaceable Unit ) listing in global configuration of PD-112.

Refer to this chapter whenever ordering for parts to repair or for RMA ( Return Merchandise

Authorization ). Please note that WHEN ORDERING FRU PARTS, you should check the most

up-to-date information available on your regional web or channel. For whatever reasons a part

number change is made, it will not be noted on the printed Service Guide. For Acer AUTHO-

RIZED SERVICE PROVIDERS, Acer office may have a DIFFERENT part number code from

those given in the FRU list of this printed Service Guide. You MUST use the local FRU list pro-

vided by your regional Acer office to order FRU parts for repair and service of customer machines.

NOTE : To scrap or to return the defective parts, you should follow the local government

ordinance or regulations on how to dispose it properly, or follow the rules set by your

regional Acer office on how to return it.

Chapter 6

Содержание PH112




























































Результаты поиска

Содержание PH112

Отзывы:

Бренды по названию

Популярные бренды

Acer PH112, Руководство по обслуживанию

Результаты поиска

Содержание PH112

Отзывы:

Бренды по названию

Популярные бренды