Acer PH112 Скачать руководство пользователя

Страница: 2 / 59

Copyright

may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated

into any language or computer language, in any form or by any means, electronic,

mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written

permission of Acer Incorporated.

Disclaimer

The information in this guide is subject to change without notice.

Acer Incorporated makes no representations or warranties, either expressed or

implied, with respect to the contents here of and specifically disclaims any warranties

of merchantability or fitness for any particular purpose. Any Acer Incorporated software

described in this manual is sold or licensed “as is”. Should the programs prove defec

tive following their purchase, the buyer (and not Acer Incorporated, its distributor, or its

dealer) assumes the entire cost of all necessary servicing, repair, and any incidental or

consequential damages resulting from any defect in the software.

Acer is a registered trademark of Acer Corporation.

Intel is a registered trademark of Intel Corporation.

Pentium and Pentium II/III are trademarks of Intel Corporation.

Other brand and product names are trademarks and/or registered trademarks of their respec-

tive holders.

Содержание PH112




























































Результаты поиска

Содержание PH112

Отзывы:

Похожие инструкции для PH112

Бренды по названию

Популярные бренды

Acer PH112, Руководство по обслуживанию

Результаты поиска

Содержание PH112

Отзывы:

Похожие инструкции для PH112

Бренды по названию

Популярные бренды