Acer NITRO XZ322QU, Руководство пользователя

Страница: 14 / 30

4
English
Connecting the power cord
• Check first to make sure that the power cord you use is the correct type
required for your area.
• The monitor has a universal power supply that allows operation in either
100/120 V AC or 220/240 V AC voltage area. No user-adjustment is required.
• Plug one end of the power cord to the AC inlet, and plug the other end into an
AC outlet.
• For units using 120 V AC:
Use a plug rated 10 A/125 V.
• For units using 220/240 V AC:
Use a plug rated 10 A/250 V. The cord set should have the appropriate safety
approvals for the country in which the equipment will be installed.
Power saving
The monitor will be switched to “power saving” mode by the control signal from
the display controller, as indicated by the red power LED.
Mode LED light
On Blue
Power saving Amber
The power saving mode will be kept until a control signal has been detected or
the keyboard or mouse is activated. The recovery time from “power saving” mode
back to “on” is around 3 seconds (Auto Source off).
Display Data Channel (DDC)
To make installation easier, so long as your system supports the DDC protocol, the
monitor is able to plug-and-play. The DDC is a communication protocol through
which the monitor automatically informs the host system about its capabilities; for
example, supported resolutions and corresponding timing. The monitor supports
the DDC2B standard.