Acer Network Device Altos R520, Инструкция по установке и настройке

Страница: 44 / 186

Altos R520 Installation Configuration Guide 28
Software Required
The management utility of onboard SATA RAID can be found in the EasyBUILD.
Software Version EasyBUILD Version
RAID Web Console
2
2.63 EasyBUILD 8.0 build 200 (or later)
Intel PROSet Utility 13.0.44.0 EasyBUILD 8.0 build 200 (or later)
Configuring onboard SATA RAID
Please refer to the Appendix C. for the onboard SATA RAID configuration.
Installation Tips
NOTE. There is no built-in driver of onboard SATA RAID in the Windows Server
2008. You need an external USB floppy drive or USB Flash drive to load driver
during the OS installation.
1.
Please make a driver diskette from the EasyBUILD first before the
installation.
2.
Click on “Load Driver” when “Where do you want to install Windows”
message displayed.
3.
Select “Intel Embedded Server RAID Technology II (A:\MegaSR.inf)” as
target driver
4.
After loading the RAID driver from diskette, you could click “Drive
options” to partition the drive.
5.
Follow the normal procedure to finish the installation.
6.
After the installation completes, you would see the following devices
with yellow mark in Device Manager.