Acer Network Device Altos R520, Инструкция по установке и настройке

Страница: 168 / 186

Altos R520 Installation Configuration Guide 152
4.
To start RAID Web Console 2, click on start button, select System -> More
Programs -> RAID Web Console 2 Startup UI
SUSE Linux Enterprise Server 9 Service Pack 3 Installation (with
integrated SAS SW RAID)
Below information describes how to manually install SUSE Linux Enterprise
Server 9 Service Pack 3 on Altos R520 with integrated SAS SW RAID.
Drivers Required
For SUSE Linux Enterprise Server 9 Service Pack 3 Installation, the following
device drivers are required.
Device Version EasyBUILD Version
Integrated SAS SW
RAID 06.06.0728.20
06
EasyBUILD 7.1 build 400 (or later)
Onboard Chipset N/A OS built-in
Onboard Gigabit
Ethernet
7.0.38-NAPI EasyBUILD 7.1 build 400 (or later)
Onboard VGA N/A OS built-in
Onboard USB 2.0 N/A OS built-in
Software Required
The management utility of integrated SAS SW RAID can be found in the
EasyBUILD.
Software Version EasyBUILD Version
RAID Web Console
2
1.13-07 EasyBUILD 7.1 build 400 (or later)
Configuring integrated SAS SW RAID
Please refer to the Appendix B. for the integrated SAS SW RAID configuration.
Installation Tips
NOTE. There is no built-in driver Integrated SAS SW RAID in the SUSE Linux
Enterprise Server 9 Service Pack 3. You need an external USB floppy drive to
load driver during the OS installation.
1.
Since SUSE Linux Enterprise Server 9 Service Pack 3 cannot recognize the
integrated SAS SW RAID, you need to make a driver diskette from the
EasyBUILD first before the installation.
2.
Boot the system form SUSE Linux Enterprise Server 9 Service Pack3
bootable CD.
3.
When you see the boot menu on the screen, select Installation, type
“brokenmodules=ahci” string in the below text tab, and press F6. Then
press Enter to continue.