Acer Network Device Altos R520, Инструкция по установке и настройке

Страница: 166 / 186

Altos R520 Installation Configuration Guide 150
Drivers Required
For SUSE Linux Enterprise Server 9 Service Pack 3 Installation, the following
device drivers are required.
Device Version EasyBUILD Version
Integrated SAS
hardware RAID 2
00.00.03.18 EasyBUILD 8.0 build 200 (or later)
Onboard Chipset N/A OS built-in
Onboard Gigabit
Ethernet
0.3.3.3 EasyBUILD 8.0 build 200 (or later)
Onboard VGA N/A OS built-in
Onboard USB 2.0 N/A OS built-in
Software Required
The management utility of integrated SAS hardware RAID 2 can be found in
the EasyBUILD.
Software Version EasyBUILD Version
RAID Web Console
2
2.63 EasyBUILD 8.0 build 200 (or later)
Configuring integrated SAS hardware RAID 2
Please refer to the APPENDIX D. for the integrated SAS hardware RAID 2
configuration.
Installation Tips
NOTE. There is no built-in driver Integrated SAS hardware RAID 2 in the SUSE
Linux Enterprise Server 9 Service Pack 3. You need an external USB floppy drive
to load driver during the OS installation.
NOTE. Before the installation, please disable the “Intel Speedstep technology”
setting. You can find the option in BIOS setting -> Advanced -> Processor
configuration -> Enhanced Intel Speedstep technology.
1.
Since SUSE Linux Enterprise Server 9 Service Pack 3 cannot recognize the
integrated SAS hardware RAID 2, you need to make a driver diskette from
the EasyBUILD first before the installation.
2.
Boot the system form SUSE Linux Enterprise Server 9 Service Pack3
bootable CD.
3.
When you see the boot menu on the screen, select Installation, press F6
then press Enter to continue.
4.
Follow the instruction to load the integrated SAS hardware RAID 2 driver
from the driver diskette.
5.
Follow the instruction to change the CD to SUSE Linux Enterprise Server 9
CD #1.