3-10
User’s Guide
Even if your setting is
Enabled
, you may also switch to the text mode
while booting by pressing
after you hear a beep that indicates the
activation of the keyboard.
When set to
Disabled
, BIOS is in the conventional text mode where
you see the system initialization details on the screen.
3.2.10
Configuration Table
This parameter allows you to display the configuration table after
POST but before booting. The configuration table gives a summary
of the hardware devices and settings that BIOS detected during
POST. Following is a sample configuration table.
CPU ID
:Pentium II
CPU Clock
:xxx MHz
Math Coprocessor: Installed
IDE Drive 0
:
xxx MB
IDE Drive 1
:
xxx MB
IDE Drive 2
:
xxx MB
IDE Drive 3
:
xxx MB
Diskette Drive A: xx-MB, xx-inch
Diskette Drive B: None
Pointing Device: None
ECC/Parity Mode: ECC
Base Memory:
:
xxx KB
Extended Memory:
xxxx KB
Shadow RAM
:
xxx KB
Internal Cache :
xxx KB, Enabled
External Cache :
xxx KB, Enabled
Serial Port(s) :
3F8h, 2F8h
Parallel Port
:
378h
DRAM Bank 0
:
None
DRAM Bank 1
:
None (EDO)
DRAM Bank 2
:
None
DRAM Bank 3
:
None
Содержание M9N System
Страница 1: ...M9N System User s Guide ...
