![background image](http://html.mh-extra.com/html/acer/ixtreme-m5150/ixtreme-m5150_service-manual_6215083.webp)
77
Jumper and Connector Information
Safety Precautions
l
Follow these safety precautions when installing the motherboard
l
Wear a grounding strap attached to a grounded device to avoid damage from static electricity
l
Discharge static electricity by touching the metal case of a safely grounded object before working on
the motherboard
l
Leave components in the static-proof bags they came in
l
Hold all circuit boards by the edges. Do not bend circuit boards
Choosing a Computer Case
There are
many types of computer cases on the market. The motherboard complies with the
specifications for the
Micro ATX system case. Firstly, some features on the motherboard are
implemented by cabling connectors on the
motherboard to indicators and switches on the
system case. Make sure that your case supports all the features
required. Secondly, this
motherboard supports one or two floppy diskette drives and two enhanced IDE drives.
Make
sure that your case has sufficient power and space for all drives that you intend to install.
Most cases have a choice of I/O templates in the rear panel. Make sure that the I/O template in the case matches
the I/O ports installed on the rear edge of the motherboard.
This motherboard carries an Micro ATX form factor of 244 X 244 mm. Choose a case that accommodates this
form factor.
Installing the Motherboard in a Case
Refer to the following illustration and instructions for installing the motherboard in a case.
Most system cases have mounting brackets installed in the case, which correspond the holes in the motherboard.
Place the motherboard over the mounting brackets and secure the motherboard onto the mounting brackets with
screws.
Ensure that your case has an I/O template that supports the I/O ports and expansion slots on your motherboard.
Chapter5
Содержание ixtreme M5150
