—
36
—
Advanced Feature
Press the
Menu
button to open the
OSD
menu. Press ◄► to move to the
Installation II
menu.
Press ▲▼ to move to the
Advanced
menu and then press
(Enter)
or ►. Press ▲▼ to move
up and down in the
Advanced
menu. Press ◄► to change values for setting.
I
TEM
D
ESCRIPTION
OSD Menu Setting
Press
(Enter)
/ ► to enter the OSD setting menu. See page
37
for more
information on
OSD Menu Setting
.
Lamp Hour Reset
After replacing the lamp, this item should be reset. See page
38
for more information
on
Lamp Hour Reset
Low Power Mode
Press the cursor ◄► button to turn Low Power Mode On, Off or On By Lan.
Test Pattern
Press the cursor ◄► button to enter and select internal test pattern.
3D
Press
(Enter)
/ ► to enter the 3D menu. See page
38
for more information on
3D
settings.
Network
Press
(Enter)
/ ► to enter the Network menu. See page
39
for more information on
Network
.
Remote Setting
Press
(Enter)
/ ► to enter the Remote Setting menu. See page
48
for more
information on
Remote Setting
.
Note:
About “
On By Lan
”, RJ45 will support to be waked up in this mode(Under 2W) but scalar won’t.
Note:
To enjoy the 3D function, first enable the Play Movie in 3D setting found in your DVD device
under the 3D Disc Menu.
