background image

Notices

vii

Important Safety Instructions

1.

Read these instructions carefully.  Save these 
instructions for future reference.

2.

Follow all warnings and instructions marked on the 
product.

3.

Unplug this product from the wall outlet before cleaning.  
Do not use liquid cleaners or aerosol cleaners.  Use a 
damp cloth for cleaning.

4.

Do not use this product near water.

5.

Do not place this product on an unstable cart, stand, or 
table.  The product may fall, causing serious damage to 
the product.

6.

Slots and openings in the cabinet and the back or 
bottom are provided for ventilation; to ensure reliable 
operation of the product and to protect it from 
overheating, these openings must not be blocked or 
covered.  The openings should never be blocked by 
placing the product on a bed, sofa, rug, or other similar 
surface.  This product should never be placed near or 
over a radiator or heat register, or in a built-in 
installation unless proper ventilation is provided.

7.

This product should be operated from the type of power 
indicated on the marking label.  If you are not sure of 
the type of power available, consult your dealer or local 
power company.

8.

Do not allow anything to rest on the power cord.  Do not 
locate this product where persons will walk on the cord.

9.

If an extension cord is used with this product, make 
sure that the total ampere rating of the equipment 
plugged into the extension cord does not exceed the 
extension cord ampere rating.  Also, make sure that the 
total rating of all products plugged into the wall outlet 
does not exceed the fuse rating.

700-e.book : 700-eNOT.fm  Page vii  Wednesday, April 22, 1998  11:18 AM

Содержание Extensa 700









































































































































Отзывы: