background image

   

iv

Warnings

Do not use this product near water.

Do not place this product on an unstable cart, stand or table. If the product 
falls, it could be seriously damaged.

Slots and openings are provided for ventilation to ensure reliable 
operation of the product and to protect it from overheating. These 
openings must not be blocked or covered. The openings should never be 
blocked by placing the product on a bed, sofa, rug or other similar surface. 
This product should never be placed near or over a radiator or heat 
register, or in a built-in installation unless proper ventilation is provided.

Never push objects of any kind into this product through cabinet slots as 
they may touch dangerous voltage points or short-out parts that could 
result in a fire or electric shock. Never spill liquid of any kind onto or into 
the product.

To avoid damage of internal components and to prevent battery leakage, 
do not place the product on a vibrating surface.

Never use it under sporting, exercising, or any vibrating environment 
which will probably cause unexpected short current or damage rotor 
devices, HDD, Optical drive, and even exposure risk from lithium battery 
pack.

The bottom surface, ventilation opening and AC power adapter may 
become hot, keep them away from human body.

Your device and its enhancements may contain small parts. Keep them out 
of the reach of small children.

Using electrical power

This product should be operated from the type of power indicated on the 
marking label. If you are not sure of the type of power available, consult 
your dealer or local power company.

Do not allow anything to rest on the power cord. Do not locate this 
product where people will walk on the cord.

If an extension cord is used with this product, make sure that the total 
ampere rating of the equipment plugged into the extension cord does not 
exceed the extension cord ampere rating. Also, make sure that the total 
rating of all products plugged into the wall outlet does not exceed the fuse 
rating.

Do not overload a power outlet, strip or receptacle by plugging in too 
many devices. The overall system load must not exceed 80% of the branch 
circuit rating. If power strips are used, the load should not exceed 80% of 
the power strip's input rating.

This product's AC adapter is equipped with a three-wire grounded plug. 
The plug only fits in a grounded power outlet. Make sure the power outlet 
is properly grounded before inserting the AC adapter plug. Do not insert 
the plug into a non-grounded power outlet. Contact your electrician for 
details.

Содержание eMachines Series























































Отзывы: