Acer ASPIRE ONE 1410, Руководство по обслуживанию

Страница: 38 / 256

28 Chapter 2
Security
The Security screen contains parameters that help safeguard and protect your computer from unauthorized
use.
The table below describes the parameters in this screen. Settings in boldface are the default and suggested
parameter settings.
NOTE: When you are prompted to enter a password, you have three tries before the system halts. Don’t forget
the password. If you forget the password, you may have to reset the computer.
Setting a Password
Follow these steps as you set the user or the supervisor password:
Parameter Description Option
Supervisor Password Is Shows the setting of the Supervisor password Clear or Set
User Password Is Shows the setting of the user password. Clear or Set
Set Supervisor Password Press Enter to set the supervisor password. When
set, this password protects the BIOS Setup Utility
from unauthorized access. The user can not either
enter the Setup menu nor change the value of
parameters.
Set User Password Press Enter to set the user password. When user
password is set, this password protects the BIOS
Setup Utility from unauthorized access. The user can
enter Setup menu only and does not have right to
change the value of parameters.
Set HDD Password Enter HDD password.
Power on password Defines whether a password is required or not while
the events defined in this group happened. The
following sub-options are all requires the Supervisor
password for changes and should be grayed out if the
user password was used to enter setup. Enabled or
Disabled
Item S pecificHelp
Install or Change the
password and the le
ngth
of password must be
greater than one wo
rd.
F 1
E S C
Help
Exit Select Item
Select Menu Change V alues
Select
SubMenu
E n t e r
F 9
F 10
Setup Default
Save and Exit
Clear
Clear
Clear
vDisabledv
Clear
Clear
Clear
vDisabledv
Supervisor Password Is :
User Password Is:
HDD Password Is:
Set Supervisor Passwo rd
Set User Password
Set Hdd Password
Power on password
Supervisor Password Is :
User Password Is:
HDD Password Is:
Set Supervisor Passwo rd
Set User Password
Set Hdd Password
Power on password
F 5 / F 6
InsydeH20 Setup Utility
Information Main Boot Exit Security