![background image](http://html.mh-extra.com/html/acer/aspire-idea-500-series/aspire-idea-500-series_service-manual_5935031.webp)
22
Chapter 1
Configuring Audio Output Settings
After connecting Aspire iDea to your audio system, you can run Realtek HD Audio to set up and adjust the audio.
1. Open Media Center.
2. Select
More Programs
>
Realtek HD Audio
.
3. Select
Speaker configuration
.
4. For analog audio output, select the option describing the number of speakers connected to your system. For
example, select 2 speakers if you have 2 speakers, 8 speakers if you have a 7.1 audio system and 6 speakers
if you have a 5.1 audio system.
5. For digital audio output, the system default is to output audio source to both analog and digital. No special
setting is needed.
6. To setup special surround sound effect, with the Realtek HD Audio, you can use the Dolby Digital Live or DTS
connect to simulate 2-channel (stereo) sound into surround-sound effect.
•
Select
Dolby
and enable Dolby Digital Live. Dolby Digital Live encodes audio signals into a Dolby Digital
5.1 bitstream for multi-channel playback through surround sound system.
•
Select
DTS
and enable DTS Neo: PC or DTS interactive. DTS consists of DTS interactive and Neo: PC,
for both multi-channel and stereo content. DTS interactive encodes audio signals into a DTS-compatible
bitstream for multi-channel playback through a surround sound system. Neo: PC transforms stereo
content, such as MP3, WMA, or CD audio, into 7.1-channel surround sound.
7. Press the
OK
button on the remote control or exit Media Center More Programs menu.
Setting up the Wireless Devices
Installing the Batteries in the Remote Control
1. Remove the battery cover from the rear side of remote control.
2. Insert two AA batteries into the battery compartment.
3. Then attach the battery cover to the remote control.
Installing the Batteries in the Wireless Keyboard
1. Remove the battery cover from the bottom side of keyboard.
2. Insert two AA batteries into the battery compartment.
3. Then attach the battery cover to the keyboard.
DVD (with Dolby Digital
AC-3 sound track)
7.1 or 5.1 channel
audio
Eight or six
speakers
Configure the Realtek HD
Audio in Media Center. Set up
audio output for eight or six
speakers.
Digital output
S/PDIF
To take advantage of Dolby
Digital sound track, you need
a Dolby Digital-equipped A/V
receiver and speaker system
with 5.1, 6.1 or 7.1 channels.
2 channel stereo
analog output
Two speakers
Configure the Realtek HD
Audio in Media Center. Set up
audio output for two speakers.
DVD (with DTS sound
track)
Digital out
S/PDIF
To take advantage of DTS
sound track, you need a DTS-
equipped A/V receiver and
speaker system with 5.1, 6.1
or 7.1 channels.
Sound track type
Hardware
connection
Audio output
setting (DVD)
Remark
Содержание Aspire iDea 500 Series
