![background image](http://html.mh-extra.com/html/acer/aspire-idea-500-series/aspire-idea-500-series_service-manual_5935065.webp)
56
Chapter 3
Disassembly Procedure
This section tells you how to disassemble the system when you need to perform system maintenance or
troubleshooting.
Note:
Before you begin, make sure you have turned off the system and remove all peripherals connected to it.
Removing the Memory
1. Release the screw holding the memory module cover on the bottom side.
2. Pull the latches as the arrows indicate and the memory will pop-up. Then remove the memory.
3. You can skip this step because the removal of memory is not a necessary step for disassembly of other parts.
Removing the Upper Case
1. Release the three screws securing the upper case and pull the upper case as the arrows indicate to remove it.
Содержание Aspire iDea 500 Series
