Acer Aspire 5515 Скачать руководство пользователя

Страница: 141 / 177

130

Chapter 4

Double-click

IDE ATA/ATAPI controllers

, then right-click ATA Device 0.

Click

Properties

and select the

Advanced

Settings

tab. Ensure that the

Enable

DMA

box is

checked and click

Repeat for the other ATA Devices shown if applicable.

Drive Not Detected

If Windows cannot detect the drive, perform the following actions one at a time to correct the problem.

Restart the computer and press F2 to enter the BIOS Utility.

Check that the drive is detected in the

ATAPI Model Name

field on the Information page.

NOTE:

Check that the entry is identical to one of the ODDs specified in “Hardware Specifications and

Configurations” on page 16.

Turn off the power and remove the cover to inspect the connections to the ODD. See “Disassembly
Process” on page 42.

Check for broken connectors on the drive, motherboard, and cables.

Check for bent or broken pins on the drive, motherboard, and cable connections.

Try an alternate cable, if available. If the drive works with the new cable, the original cable should be
replaced.

Reseat the drive ensuring and all cables are connected correctly.

Replace the ODD. See “Disassembly Process” on page 42.

Drive Read Failure

If discs cannot be read when inserted in the drive, perform the following actions one at a time to correct the
problem.

Remove and clean the failed disc.

Retry reading the CD or DVD.

Test the drive using other discs.

Play a DVD movie

Listen to a music CD

If the ODD works properly with alternate discs, the original disc is probably defective and should be
replaced.

Turn off the power and remove the cover to inspect the connections to the ODD. See “Disassembly
Process” on page 42.

Check for broken connectors on the drive, motherboard, and cables.

Check for bent or broken pins on the drive, motherboard, and cable connections.

Try an alternate cable, if available. If the drive works with the new cable, the original cable should be
replaced.

Replace the ODD. See “Disassembly Process” on page 42.

Содержание Aspire 5515


















































































































































































Результаты поиска

Содержание Aspire 5515

Отзывы:

Похожие инструкции для Aspire 5515

Бренды по названию

Популярные бренды

Acer Aspire 5515, Руководство по обслуживанию

Результаты поиска

Содержание Aspire 5515

Отзывы:

Похожие инструкции для Aspire 5515

Бренды по названию

Популярные бренды