Acer Altos S700 Series, Руководство пользователя

Страница: 52 / 124

Chapter 3 JBOD Configurations 36
This section describes the procedure for connecting the enclosure in
quad loop mode. For this configuration there must be two LS modules
and two I/O modules installed in the enclosure.
1 Remove both LS modules from the enclosure and install a jumper,
at jumper location JP3 if one is not already installed. This sets the
enclosure to operate in split loop mode.
2 Attach cables to the top and bottom connector of both I/O
modules (see Figure 3-4).
3 Attach the other end of these four cables to your host systems.
Figure 3-4 Cabling the Quad Loop Configuration
1
2
1
2
0
I
0 I
Loop A
Loop B
Drives 1-7
LSM
LSM
Dr
iv
e 1
Dr
iv
e 2
Dr
iv
e 3
Dr
iv
e 4
Dr
iv
e 5
Dr
iv
e 6
Dr
iv
e 7
Dr
iv
e 8
Dr
iv
e 9
Dr
iv
e 10
Dr
iv
e 11
Dr
iv
e 12
Dr
iv
e 13
Dr
iv
e 14
Drives 8-14
Drives 1-7
Drives 8-14