manualshive.com logo in svg

Acer Altos R710, Руководство по обслуживанию

Аcer Altos R710 - мощный сервер для бизнес-центров и предприятий. Управляйте своим оборудованием с легкостью, используя наш user manual. Скачайте его бесплатно на manualshive.com. Получите все необходимые инструкции для эффективной работы с вашим сервером.

Поделиться
Скачать
background image

99

Chapter 4

Secondary Master Hard 
Disk Error

The IDE/ATAPI device configured as Secondary Master could not be properly 
initialized by the BIOS. This message is typically displayed when the BIOS is 
trying to detect and configure IDE/ATAPI devices in POST. 

Secondary Slave Hard Disk 
Error

The IDE/ATAPI device configured as Secondary Slave could not be properly 
initialized by the BIOS. This message is typically displayed when the BIOS is 
trying to detect and configure IDE/ATAPI devices in POST. 

3rd Master Hard Disk Error

The IDE/ATAPI device configured as Master in the 3rd IDE controller could not 
be properly initialized by the BIOS. This message is typically displayed when 
the BIOS is trying to detect and configure IDE/ATAPI devices in POST.

3rd Slave Hard Disk Error

The IDE/ATAPI device configured as Slave in the 3rd IDE controller could not be 
properly initialized by the BIOS. This message is typically displayed when the 
BIOS is trying to detect and configure IDE/ATAPI devices in POST.

4th Master Hard Disk Error

The IDE/ATAPI device configured as Master in the 4th IDE controller could not 
be properly initialized by the BIOS. This message is typically displayed when 
the BIOS is trying to detect and configure IDE/ATAPI devices in POST.

4th Slave Hard Disk Error

The IDE/ATAPI device configured as Slave in the 4th IDE controller could not be 
properly initialized by the BIOS. This message is typically displayed when the 
BIOS is trying to detect and configure IDE/ATAPI devices in POST.

5th Master Hard Disk Error

The IDE/ATAPI device configured as Master in the 5th IDE controller could not 
be properly initialized by the BIOS. This message is typically displayed when 
the BIOS is trying to detect and configure IDE/ATAPI devices in POST.

5th Slave Hard Disk Error

The IDE/ATAPI device configured as Slave in the 5th IDE controller could not be 
properly initialized by the BIOS. This message is typically displayed when the 
BIOS is trying to detect and configure IDE/ATAPI devices in POST.

6th Master Hard Disk Error

The IDE/ATAPI device configured as Master in the 6th IDE controller could not 
be properly initialized by the BIOS. This message is typically displayed when 
the BIOS is trying to detect and configure IDE/ATAPI devices in POST.

6th Slave Hard Disk Error

The IDE/ATAPI device configured as Slave in the 6th IDE controller could not be 
properly initialized by the BIOS. This message is typically displayed when the 
BIOS is trying to detect and configure IDE/ATAPI devices in POST.

Primary Master Drive-ATAPI 
Incompatible

The IDE/ATAPI device configured as Primary Master failed an ATAPI 
compatibility test. This message is typically displayed when the BIOS is trying to 
detect and configure IDE/ATAPI devices in POST.

Primary Slave Drive-ATAPI 
Incompatible

The IDE/ATAPI device configured as Primary Slave failed an ATAPI 
compatibility test. This message is typically displayed when the BIOS is trying to 
detect and configure IDE/ATAPI devices in POST. 

Secondary Master Drive-
ATAPI Incompatible

The IDE/ATAPI device configured as Secondary Master failed an ATAPI 
compatibility test. This message is typically displayed when the BIOS is trying to 
detect and configure IDE/ATAPI devices in POST. 

Secondary Slave Drive-
ATAPI Incompatible

The IDE/ATAPI device configured as Secondary Slave failed an ATAPI 
compatibility test. This message is typically displayed when the BIOS is trying to 
detect and configure IDE/ATAPI devices in POST. 

3rd Master Drive-ATAPI 
Incompatible

The IDE/ATAPI device configured as Master in the 3rd IDE controller failed an 
ATAPI compatibility test. This message is typically displayed when the BIOS is 
trying to detect and configure IDE/ATAPI devices in POST.

3rd Slave Drive-ATAPI 
Incompatible

The IDE/ATAPI device configured as Slave in the 3rd IDE controller failed an 
ATAPI compatibility test. This message is typically displayed when the BIOS is 
trying to detect and configure IDE/ATAPI devices in POST.

4th Master Drive-ATAPI 
Incompatible

The IDE/ATAPI device configured as Master in the 4th IDE controller failed an 
ATAPI compatibility test. This message is typically displayed when the BIOS is 
trying to detect and configure IDE/ATAPI devices in POST.

4th Slave Drive-ATAPI 
Incompatible

The IDE/ATAPI device configured as Slave in the 4th IDE controller failed an 
ATAPI compatibility test. This message is typically displayed when the BIOS is 
trying to detect and configure IDE/ATAPI devices in POST.

Storage Device BIOS Messages

Message Displayed

Description

Содержание Altos R710





















































































































































Отзывы:

Нет отзывов

Похожие инструкции для Altos R710

IBM 990 Reference Manual preview
990
Бренд: IBM Страницы: 88
Vxl Itona TC73yy Hardware User'S Manual preview
Itona TC73yy
Бренд: Vxl Страницы: 19
Buffalo LS520D Series Quick Setup Manual preview
LS520D Series
Бренд: Buffalo Страницы: 2
Ubiquiti UniFi UAS-PRO Quick Start Manual preview
UniFi UAS-PRO
Бренд: Ubiquiti Страницы: 28
Telvue HyperCaster User Manual preview
HyperCaster
Бренд: Telvue Страницы: 153
Speco ONSIP OS101 User Manual preview
ONSIP OS101
Бренд: Speco Страницы: 28
PalatiumCare Palcare PAL-211401 Install Manual preview
Palcare PAL-211401
Бренд: PalatiumCare Страницы: 64
Chauvet VIP Media Server Pro Quick Reference Manual preview
VIP Media Server Pro
Бренд: Chauvet Страницы: 20
Fujitsu PRIMEQUEST 3800E System Configuration Manual preview
PRIMEQUEST 3800E
Бренд: Fujitsu Страницы: 38
Fujitsu PRIMERGY B900 Reference Manual preview
PRIMERGY B900
Бренд: Fujitsu Страницы: 36
Fujitsu Primergy BX2560 M1 Operating Manual preview
Primergy BX2560 M1
Бренд: Fujitsu Страницы: 68
Fujitsu PRIMEQUEST 3000 Series Getting Started Manual preview
PRIMEQUEST 3000 Series
Бренд: Fujitsu Страницы: 44
Fujitsu PRIMERGY User Manual preview
PRIMERGY
Бренд: Fujitsu Страницы: 56
Fujitsu PRIMEQUEST 2800B3 System Configuration Manual preview
PRIMEQUEST 2800B3
Бренд: Fujitsu Страницы: 28
Fujitsu PRIMERGY 870 Technical Manual preview
PRIMERGY 870
Бренд: Fujitsu Страницы: 35
Fujitsu PRIMERGY 10/40GbE Connection Blade 18/8+2 Function Manual preview
PRIMERGY 10/40GbE Connection Blade 18/8+2
Бренд: Fujitsu Страницы: 71
Fujitsu PRIMERGY 300 Operating Manual preview
PRIMERGY 300
Бренд: Fujitsu Страницы: 94
Fujitsu PRIMEQUEST 3800E2 System Configuration Manual preview
PRIMEQUEST 3800E2
Бренд: Fujitsu Страницы: 42

Бренды по названию

Популярные бренды

Загрузить еще бренды