Acer AL1922 Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 70

background image

4

Warning: (For FCC Certified Models)

Note:

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy, and if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

4. Consult the dealer or an experienced radio/TV technician for help.

Notice:

1. The changes or modifications not expressly approved by the party responsible for

compliance could void the user's authority to operate the equipment.

2. Shielded interface cables and AC power cord, if any, must be used in order to comply with

the emission limits.

3. The manufacturer is not responsible for any radio or TV interference caused by

unauthorized modification to this equipment. It is the responsibility of the user to correct
such interference.

As an ENERGY STAR

®

Partner our company has determined that this product meets the

ENERGY STAR

®

guidelines for energy efficiency.

Warning:

To prevent fire or shock hazard, do not expose the monitor to rain or moisture. Dangerously
high voltages are present inside the monitor. Do not open the cabinet. Refer servicing to
qualified personnel only.

«
...
3
4
5
6
7
...
»

Содержание AL1922







































































Отзывы:

Нет отзывов

Похожие инструкции для AL1922

Бренд: Acer Страницы: 2

Бренд: Daktronics Страницы: 79

Бренд: JETWAY Страницы: 10

Бренд: iHealth Страницы: 16

Бренд: Oricom Страницы: 24

Бренд: Speco Страницы: 1

Бренд: ReliOn Страницы: 52

Бренд: Uctronics Страницы: 2

Бренд: Matko Страницы: 18

Бренд: Graco Страницы: 6

Бренд: Mitsutech Страницы: 10

MultiSync E241N

Бренд: NEC Страницы: 22

Бренд: NEC Страницы: 38

MultiSync XP29, XM29 Xtra

Бренд: NEC Страницы: 40

Бренд: NEC Страницы: 16

Бренд: Samsung Страницы: 101

Бренд: Samsung Страницы: 111

Бренд: Samsung Страницы: 43

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды