Acer AL1922 Скачать руководство пользователя страница 31 | Manualshive

Страница: 31 / 70

background image

30

Logo

When the monitor is power on, the LOGO will be showed in the center, and disappear slowly.

How To Optimize The DOS-Mode

Plug And Play
Plug & Play DDC1/2B Feature

This monitor is equipped with VESA DDC1/2B capabilities according to the VESA DDC
STANDARD. It allows the monitor to inform the host system of its identity and, depending on
the level of DDC used, communicate additional information about its display capabilities. The
communication channel is defined in two levels, DDC1 and DDC2B.
The DDC1 is a unidirectional data channel from the display to the host that continuously
transmits EDID information. The DDC2B is a bidirectional data channel based on the I²C
protocol. The host can request EDID information over the DDC2B channel.

This monitor will appear to be non-functional if there is no video input signal. In order
for this monitor to operate properly, there must be a video input signal.

This monitor meets the Green monitor standards as set by the Video Electronics Standards
Association (VESA) and/or the United States Environmental Protection Agency (EPA) and
The Swedish Confederation Employees (NUTEK). This feature is designed to conserve
electrical energy by reducing power consumption when there is no video-input signal present.
When there is no video input signal this monitor, following a time-out period, will automatically
switch to an OFF mode. This reduces the monitor's internal power supply consumption. After
the video input signal is restored, full power is restored and the display is automatically
redrawn. The appearance is similar to a "Screen Saver" feature except the display is
completely off. The display is restored by pressing a key on the keyboard, or clicking the
mouse.

Using The Right Power Cord

The accessory power cord for the Northern American region is the wallet plug with NEMA
5-15 style and is UL listed and CSA labeled. The voltage rating for the power cord shall be
125 volts AC.
Supplied with units intended for connection to power outlet of personal computer: Please use
a cord set consisting of a minimum No. 18 AWG, type SJT or SVT three conductors flexible
cord. One end terminates with a grounding type attachment plug, rated 10A, 250V, CEE-22
male configuration. The other end terminates with a molded-on type connector body, rated
10A, 250V, having standard CEE-22 female configuration.
Please note that power supply cord needs to use VDE 0602, 0625, 0821 approval power cord
in European counties.

«
...
29
30
31
32
33
...
»

Содержание AL1922







































































Отзывы:

Нет отзывов

Похожие инструкции для AL1922

Бренд: NEC Страницы: 2

Бренд: NEC Страницы: 2

Бренд: NEC Страницы: 2

Бренд: NEC Страницы: 4

Бренд: NEC Страницы: 36

Бренд: NEC Страницы: 71

ASPV46-AVT - AccuSync - 46" LCD TV

Бренд: NEC Страницы: 4

Бренд: QSC Страницы: 4

Бренд: Quark-Elec Страницы: 2

MULTISYNC LCD1510+

Бренд: NEC Страницы: 2

Бренд: YEYIAN Страницы: 28

Бренд: IEE Страницы: 22

Бренд: ROE Страницы: 37

SMARTMETER iBloodPressure 2.0

Бренд: A&D Страницы: 32

Бренд: EDI Страницы: 16

Бренд: TANDBERG Страницы: 11

Бренд: Yada Страницы: 16

TechTouch MO140RX

Бренд: Safety 1st Страницы: 10

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды