background image

 

Attachment 

Plug and Play

 

 

 

The product provides the latest VESA 

plug and play

function to prevent complicated 

and time-consuming installation procedures. The

 plug and play

 function allows your 

computer system to identify the LCD display easily and set up the functions of the 
LCD display automatically. 

The LCD display transfers the 

Extended Display Identification Data

 (EDID) to your

computer system via the 

Display Data Channel

 (DDC), so that your computer can 

use the self-setting function of the LCD display.

 

 

Power Saver 

 

 

 

 

 

 

 

The LCD display has a built-in Power Control System (

Power Saver

). 

When the LCD display is not operated during a certain time, the Power Control 
System will brings the LCD display into low voltage status automatically to save 
power. Move the mouse slightly or press any key to return to the normal operation. 

The 

Power Saver

 function can only be operated by the display card of the computer 

system. You can set up this function from your computer. 

The LCD display is compatible with EPAENERGY STAR NÜTEK when used with 
VESA DPMS. 

To save power and extend the life of the product, turn off the LCD display power 
supply when it is not used or when remaining idle for a long time. 

 

Troubleshooting 

 

Power LED does not 

light

 

 

Check that the power switch is turned on. 

Make sure that the power cable is connected. 

 

Icon off

 

 

 

 

 

 

 

 

 

 

 

 

Check that the power switch is turned on. 

Make that the power cable is connected. 

Ensure that the signal cable is inserted in the receptacle appropriately. 

The Power Saver may turn off the display automatically during the operation. Make 
sure that the display is restored when you press any key from the keyboard. 

 

Color Default

 

Refer to “Color Temperature Adjustment” to adjust RGB color or select color 
temperatures. 

Instability or Ripple

 

Remove the electronic equipment in the vicinity that may cause EMI interference. 

Check the signal cable of the display and ensure that no pin is bent. 

 

Image Offset or 

wrong Size

 

Press the auto adjustment button to optimize the screen automatically. 

Set up the reference position. 

 

 
 

Содержание AL1714










Отзывы: