manualshive.com logo in svg

Acer AcerPower F6, Руководство по обслуживанию

Поделиться
Скачать
Acer AcerPower F6 Скачать руководство пользователя страница 69

Chapter 5

61

I/O Devices

The backplane of the main board has the following I/O ports:

Part Name

Description

PS2 Mouse

Use the upper PS/2 port to connect a PS/2 pointing 
device.

PS2 Keyboard

Use the lower PS/2 port to connect a PS/2 keyboard.

Parallel Port (LPT1)

Use LPT1 to connect printers or other parallel 
communication devices.

Serial Port (COM1)

Use the COM port to connect serial devices such as 
mouse or fax / modems. COM1 is identified by the 
system as COM1/3.

VGA Port 

It serves as the connection between the system and an 
external monitor.

1394a Port (optional)

Use the 1394a port to connect to any firewire device.

LAN Port (optional)

It is the connection between an RJ-45 jack and the 
system.

USB Ports

Use the USB ports to connect USB devices.

Audio Ports

The D port is for stereo line-in jack, while the F port is for 
microphone in signal. This main board supports eight-
channel audio devices that correspond to the A, B, C, 
and E port respectively. In addition, all of the three 
ports, B, C, and E provide users with both right and left 
channels individually. 
•  A: Center & Woofer

•  B: Back Surround
•  C: Side Surround

•  D: Line-in
•  E: Front Out
•  F: Mic-in Rear

NOTE: 

The above port definition can be changed to 

audio input or audio output by changing the driver 
utility setting.

 

Содержание AcerPower F6







































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды