![background image](http://html.mh-extra.com/html/acer/acerpower-f6/acerpower-f6_service-manual_5753067.webp)
Chapter 5
59
CHS1: Chassis Intrusion Detect Header
SATA1~4: Serial ATA Connectors
These connectors are used to support the new Serial ATA devices for the higher date transfer
rates (3.0 Gb/s), simpler disk drive cabling and easier PC assembly. It eliminates limitations of the
current Parallel ATA interface but still maintains the register compatibility and software
compatibility with Parallel ATA.
SPDIFO2: SPDIF out Header (Optional)
This is an optional header that provides an SPDIFO (Sony / Philips Digital Interface) output to
digital multimedia device through optional fiber or coaxial connector.
1394A1: IEEE 1394a Header (optional)
This header supports any device with IEEE 1394a interface.
IR1: Infrared Header
The main board supports an infrared (IR1) data port. Infrared port allows the wireless exchange
of information between the computer and similarly equipped devices such as printers, laptops,
PDAs, and other computers.
Pin 1-2
Function
Short
Case opened
Open
Case closed
Pin
Signal Name
Pin
Signal Name
1
Ground
2
TX+
3
TX-
4
Ground
5
RX-
6
RX+
7
Ground
-
-
Pin
Signal Name
Function
1
+5VA
5V analog power
2
KEY
No pin
3
SPDIF
SPDIF digital output
4
GND
Ground
Pin
Signal Name
Pin
Signal Name
1
TPA1P
2
TPA1M
3
GND
4
GND
5
TPB1B
6
TPB1M
7
CPWR2
8
CPWR2
9
Key
10
GND
Содержание AcerPower F6
