Acer 510 Series Скачать руководство пользователя страница 106

Страница: 106 / 149

Notebook Manager

User’s Guide

for a bootable CD-ROM in the CD-ROM or DVD-ROM
drive and boots from there. If no bootable CD is present,
the computer boots from the hard disk.

IDE Hard Drive. The computer boots directly from the
hard drive.

Make your selection and click on

Apply

to activate the

setting.

Password

Password is used to set, modify or delete the password(s) for
your computer.

There are two passwords used in the system:

Power-On Password. The Power-On password prevents
unauthorized access to the computer during system
startup and at resume from Standby/Hibernation
modes or an elapsed system resume timer.

Setup Password. The Setup password prevents
unauthorized access to the computer’s BIOS Utility.

510.book : 510-5.fm Page 84 Thursday, March 4, 1999 1:03 PM

Содержание 510 Series






















































































































































Результаты поиска

Содержание 510 Series

Отзывы:

Acer 510 Series, Руководство пользователя, Страница: 106 / 149

Результаты поиска

Содержание 510 Series

Отзывы: