eBoard Installation guide
21
As indicated in window, place pen at bottom of blue light on
“Left receiver” and press
it continuously till “RECOGNIZED” is displayed.
[Sub-step 3] Click pen on the right receiver.
When you go
t “RECOGNIZED” message from left receiver, MINT Control again
displays the following window to get position value for
“Right receiver”.
In a same way, place pen at bottom of blue light on
“Right receiver” and press it
continuously till “RECOGNIZED” is displayed.
After displaying “RECOGNIZED” message, MINT Control automatically moves to
[Screen Calibration] mode.
B. Fine setup
As mentioned in previous page, “Fine setup” is required for the following cases.
①
For the 1
st
HW installation.
②
After changing Receiver position.
③
For cursor inaccuracy in working mode after successful screen calibration.
