Ace ACE-3105, Инструкция по установке и эксплуатации

Страница: 84 / 418

Chapter 3 Operation Installation and Operation Manual
3-14 Menu Paths ACE-3105, ACE-3205 Ver. 5.2
Accordingly:
•
For file transfers via XMODEM – a standard terminal application, such as
Windows HyperTerminal, must be installed on the local computer.
HyperTerminal is bundled with Windows XP by default, and can be accessed
via Start> All Programs> Accessories> Communications> HyperTerminal.
Figure 3-13. Windows HyperTerminal
•
For file transfers via TFTP – a TFTP server application must be installed on the
local or remote computer. As it runs in the background, the TFTP server waits
for any TFTP file transfer request originating from the product unit, and
carries out the received request automatically.
A variety of third-party applications, such as 3Cdaemon (available from
www.3com.com) or PumpKIN (available from http://kin.klever.net/pumpkin/),
allow the instant creation of a TFTP server on a client computer. For more
information, refer to the documentation of these applications.
When using the RADview-EMS management package, a dedicated TFTP
application is installed on the network management station (NMS), allowing
TFTP protocol operations to be initiated to/from it. For more information,
refer to the RADview-EMS user's manual.
3.6 Menu Paths
Once you have logged-in to ACE-3105, ACE-3205 via an ASCII terminal or
ConfiguRAD, navigate the hierarchal menus to set and view the unit's
configuration parameters, and to perform other essential operations.
Figure 3-14
illustrates the main categories that are available from the main menu.