ACE097
Page 19 of 23
Rev Date:3.18.2022
3.
Locate four PEEK nuts (A, B, C, D) and four rotating wires (1, 2, 3, 4) on the heatsink as shown
below.
4.
Check the rotating wires (1, 2, 3, 4) are in the unlatched position as shown.
5.
Align nut A (next to the triangles and pin 1) on the heatsink with threaded fastener “a” on the
CPU socket. Also align nuts B, C, D on the heatsink with threaded fasteners b, c, d on the CPU
socket.
6.
Gently place the heatsink on the CPU socket, making sure that each nut is properly aligned with
its corresponding threaded fastener.
