ACE097
Page 12 of 23
Rev Date:3.18.2022
6.
Blade Chassis Cover
Location: The chassis cover is located on the upright, top side of the server, and it approximately
2/3 the size of the entire top, as noted in the illustration below.
Type and number of fastenings: One (1) Phillips Head Screw.
Tools required: Phillips Head Screw Driver.
Procedure: To remove the cover, remove the screw as illustrated below. Slide the Cover toward
the rear and lift it off.
Selective Treatment/Special Handling Per Annex VII, Directive 2012/19/EU: None
