1
English
1
English
-6
broken accessory may fly away and cause injury beyond immediate area of
operation.
Do not run the power tool while carrying it at your side.
Regularly clean the power ‘tool’s air vents.
The motor’s fan will draw the dust
inside the housing and excessive accumulation of powdered metal may cause
electrical hazards.
Do not operate the power tool near flammable materials.
Sparks could ignite
these materials.
Maintain a firm grip on the power tool and position your body and arm to allow
you to resist vibration forces.
Never place your hand near the rotating part.
Wear appropriate personal hearing protection during use.
Under some
conditions and duration of use, noise from this product may contribute to hearing
loss.
SYMBOLS
The label on your tool may include the following symbols. The symbols and their
definitions are as follows:
SYMBOL
NAME
EXPLANATION
V Volts
Voltage
(potential)
n
o
No Load Speed
No-load Rotational Speed
kg Kilograms
Weight
Direct Current
Type of Current
…/min
Revolutions per
Minute
Revolutions, Surface Speed, Strokes, etc.
per Minute
