ACDC SDAW4.6-220, Инструкция по установке и обслуживанию

Страница: 6 / 29

5
Never use an extension cable to connect the unit to the electric power supply.
If there is no suitable, earthed wall socket available, have one installed by a recognized electrician.
Do not move/repair the unit yourself.
Improper movement or repair on the unit could lead to water leakage, electrical shock, injury or fire.
Have any repairs and/or maintenance only carried out by a recognized service engineer.
Do not plug or unplug the power supply during operation
There is a risk of fire or an electric shock
Do not touch/operate the unit with wet hands
There is a risk of fire or an electric shock
Do not place a heater or other appliances near the power cable
There is a risk of fire or an electric shock
Be cautious that water could not be poured to the product directly, do not allow water to run into
electric parts
There is a risk of fire or an electric shock
Working ambient temperature: -7°C to 45°C, working pressure:0.1MPa to 1.0MPa, fuse link: AC250V,
T3.15AL, Power cord: H07RN-F, 1.5mm²
An all-pole disconnection device which has at least 3mm clearances in all poles , and have a leakage
current that may exceed 10mA, the residual current device (RCD) having a rated residual operating
current not exceeding 30mA, and disconnection must be incorporated in the fixed wiring in
accordance with the wiring rules.
If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a
similarly qualified person in order to avoid a hazard.
This appliance has not been designed for use by persons (including children) with reduced physical,
sensorial or mental faculties or by persons without any experience or knowledge of heating systems,
unless they act under the safety and supervision of a responsible person or have received prior
training concerning the use of the appliance.
Children should be supervised to ensure that they do not play with the appliance
IF THE PRODUCT IS NOT USED FOR A LONG TIME, WE STRONGLY RECOMMEND NOT TO SWITCH
‘OFF’ THE POWER SUPPLY OF THE UNIT.
IF THE POWER IS NOT SUPPLIED, SOME SPECIAL PRODUCT-PROTECTING ACTIONS (SUCH AS
ANTI-FREEZE) WILL NOT BE PERFORMED.