ACDC SDAW4.6-220, Инструкция по установке и обслуживанию

Страница: 19 / 29

18
Installation space
Mounting the unit
When installing the outdoor unit, please refer to “Installation guidelines” to select an appropriate
location.
1.
Check the strength and level of the installation ground so that the unit will not cause any operating
vibration or noise after installation.
2. Prepare 4 sets of M8 foundation bolts, nuts and washers each (filed supply).
3. Fix the unit securely by means of the foundation bolts in accordance with the foundation drawing. It
is best to screw in the foundation bolts until their length remains 20mm above the foundation
surface.
Water pipe-work
Checking the water circuit
The water circuits must be provided by a licensed technician and must comply with all relevant
European and national regulations.
THE UNIT IS ONLY TO BE USED IN A CLOSED WATER SYSTEM. APPLICATION IN AN OPEN WATER
CIRCUIT CAN LEAD TO EXCESSIVE CORROSION OF THE WATER PIPING.
Before continuing the installation of the unit, check the following points:

The maximum water pressure is 6 bar.