AccuTools DS-220R, Руководство пользователя

Страница: 12 / 20

DS-220R User’s Guide
10
Tank Capacity Mode Training
1. While holding down, press . The SET TANK indicator will turn on, and
OFF will show on the display. This indicates that the Tank Capacity Mode is
currently off.
2. Turn the Tank Capacity Mode on by pressing . The display will show ON ,
and the Alternate Numeric Display and Percent Indicator will turn on.
3. Press to proceed to the first step of training. 0% will flash in the Alternate
Numeric Display indicating that the weight of an empty container must be
registered.
4. Apply an empty container (or a load representing the weight of an empty
container) on the platform. Wait 5 seconds for the load to stabilize, then press
. 100% will flash in the Alternate Numeric Display indicating that the weight
of a full container must be registered.
5. Apply a full container (or a load representing the weight of a full container) on the
platform. Wait 5 seconds for the load to stabilize, then press . This
completes the training process, and the SET TANK indicator will turn off.
6. From this point forward, the Alternate Numeric Display will show the percent of
material remaining in the container from 0% to 100%.
NOTE: The 100% weight must be larger than the 0% weight by at least 200g. If not,
“ Err ” will show on the Alternate Numeric Display. To clear the error, retrain as above
using a 100% weight that is at least 200g larger than the 0% weight. During training,
the ZERO key may be used to assist in setting the 0% and 100% values. This will
have no effect on the training, as the Tank Capacity Mode relies on absolute, not
relative, weights.