MP5032-2104
XLR8 HEATED PLATEN
9
4.2.2 GENERAL OPERATION
1. Press the ON/OFF key to turn the unit on. The display will come on and show the current
temperature in the display.
2. To turn the unit off press and hold the ON/OFF key for about 5 seconds.
3. Temperature control features:
4. PRESET TEMPERATURES:
A. To change to a different PRESET temperature press the PRESET TEMP key to toggle to the
desired temp setting. (Default values are defined in Manager’s mode, parameters 1, 2 and 3).
The new selection will auto start after 3 seconds if no other key presses are made.
B. To change the temperature on the fly or change a pre-set temp value:
i. Press the PRESET TEMP key once to change on the fly to a desired operating temp or press
the PRESET TEMP key multiple times to toggle to a specific pre-set to change (Default values
are defined in Manager’s mode, parameters 1, 2 and 3. Factory default temps are 375°F, 350°F
and 400°F).
ii. Then press and hold the UP or DOWN keys for approximately 3 seconds, the LED indicator for
the selected pre-set will blink. (The LED’s indicate which preset is selected LED1=PRESET 1,
LED2 = PRESET 2, and LED3 = PRESET 3.)
iii. Then press the UP or DOWN KEYS to increase or decrease the cook temperature.
iv. To store the new set temperature into a Preset memory, press and hold the ASTERISK key
before the 3 seconds from the last key press are up.
5. Manual TImer Operation:
A. To start a timer sequence manually press the TIMER RESET key.
B. To stop a timer sequence before it runs out, press and hold the TIMER RESET key for about
three seconds.
C. To silence the timer after it runs out, press the TIMER RESET key or the ASTERISK key.
6. Auto-Start Timer Operation
A. To start a timer sequence lower the handle.
B. To stop a timer sequence before it runs out, press and hold the TIMER RESET key for about
three seconds.
C. To silence the timer after it runs out, lift the handle or press the TIMER RESET key or the
ASTERISK key.
7. To set up user lock out to prevent anyone from changing the temperatures or timer values
press and hold the UP ARROW key and the TIMER RESET key for 5 seconds while the controller
is OFF. This will Toggle USER LOCKOUT parameter between “LOCKED” and “UNLOCKED”.
