AccuTemp Vision Скачать руководство пользователя страница 33

33

User’s manual  |  Vision™ Combi steamers  I

  

09 SERVICE LIFE, TAKING OUT OF OPERATION AND WARRANTY

9  I   WARRANTY

LIMITED WARRANTY VISION/VISON TOUCH COMBI OVEN

 

One Year - Parts & Labor - U.S. Only

 

AccuTemp Products, Inc. (AccuTemp) warrants that your AccuTemp Vision Combi Oven will be free of defects in material and 

workmanship under normal use for a period of Twelve (12) months from installation or fifteen (15) months from date of shipment from 

AccuTemp, whichever date first occurs.

 

It is the sole responsibility of the owner/operator/purchaser of this equipment to verify that the incoming water supply is 

comprehensively tested and if required, a means of “water treatment” provided that would meet the compliance requirements with the 

published water quality standards published below. Non-compliance with these minimum standards will potentially damage this 

equipment and/or components and VOID the original equipment manufacturer’s warranty.

 

Water Quality Requirements  

Description

 

Value

 

Inlet Pressure

 

40 – 80 psi

 

Free Chlorine

 

< 0.1 ppm (mg/l)

 

Total Chlorine

 

< 0.1 ppm (mg/l)

 

pH

 

7 - 8.5

 

Total Dissolved Solids

 

  < 150 ppm (mg/l)

 

Water Hardness

 

< 90 ppm (mg/l)

 

Alkalinity (as CaC3)

 

< 60 ppm (mg/l)

 

Chlorides (CNitrate) 

< 40 ppm (mg/l)

 

Iron FE

 

< 0.1 ppm (mg/l)

 

Silica

 

< 13 ppm (mg/l)

 

Registration of AccuTemp equipment is required which includes an Installation/Operational  check sheet that must  be completed post 

installation and sent to AccuTemp to activate the limited warranty.

 

Damage to AccuTemp equipment that occurs during shipment must be reported to the carrier, and is not covered under this warranty. The 

reporting of any damage during shipment to the carrier is the sole responsibility of owner/operator/purchaser of such AccuTemp 

equipment.

 

While  AccuTemp products are  built to  comply with applicable standards for  manufacturers, including Underwriters Laboratories (UL)  and 

Underwriters Laboratories Sanitation requirements, it is the responsibility of the owner/operator/purchaser and the installer to comply with 

any applicable local codes that may exist.

 

AccuTemp should be contacted and advised of service issues, regardless of the warranty period. During the warranty period, AccuTemp 

must  be contacted  for warranty service requests.  AccuTemp  agrees to repair or replace, at its option, F.O.B. factory, any part which 

proves to be defective due to defects in material or workmanship, provided the equipment has not been altered in any way and has been 

properly installed, maintained, and operated in accordance with the instructions in the AccuTemp Installation/Operators Manual. During 

the warranty period AccuTemp also agrees to pay for any factory authorized equipment service agency within the continental United 

States for reasonable labor required to repair or replace, at our option, F.O.B. factory, any part which proves to be defective due to defects 

in materials or workmanship, provided the service agency has received advance approval from AccuTemp to perform the repair   or 

replacement. This warranty includes travel time not to exceed two hours and mileage not to exceed 50 miles (100 miles round trip) 

during standard business hours, excluding overtime hours, holiday rates or any other additional fees.

 

Warranty Does Not Apply To:

 

1. 

Post start-up assistance or training, tightening of loose fittings, external electrical, plumbing and drain connections. Minor 

adjustments and cleaning of any kind.

 

2. 

Damage caused as the result of inadequate routine maintenance and cleaning. Routine maintenance and cleaning is the

responsibility of the commercial purchaser/user.

3. 

Replacement of wear parts, including light bulbs, door gaskets and replacement of glass due to damage of any kind.

 

4. 

Equipment damage caused by shipping and handling, improper installation, accident or alteration of any kind. 

5. 

Any damage caused by failure to comply with the water quality requirements listed in this document. 

6. 

The use of cleaning and care products not recommended by AccuTemp.

AccuTemp makes no other warranties or guarantees, whether expressed or implied, including any warranties of performance, merchantability, 

or fitness for any particular purpose. AccuTemp liability on any claim of any kind, including negligence, with respect to the goods and services 

covered hereunder, shall in no case exceed the price of the goods and services, or parts thereof, which gives rise to the claim. In no event shall 

AccuTemp be liable for special, incidental, or consequential damages, or damages in the nature of penalties.

 

This constitutes the entire warranty, which supersedes and excludes all other warranties, whether written, oral, or implied.

 

MP6930-1710 

Содержание Vision





































Отзывы: